Levoit Classic Pro Bedienungsanleitung Seite 10

EN
U S I N G YO U R TOW E R
FA N
1. Tap to turn on the tower fan.
2. Tap to change fan speed from 1
(low) to 12 (high).
3. Move the angle adjuster up and down
to adjust the direction of the wind.
[Figure 3.1]
4. Optionally, tap
fan mode.
5. Tap to turn Advanced Sleep Mode
on/off.
Fan Modes
Tap to cycle through fan modes:
Normal, Turbo, and Auto.
Normal Mode
Use Normal Mode to manually control the
tower fan's speed.
speed from 1 (low) to 12 (high).
• This is the tower fan's default mode.
• will show on the display.
Turbo Mode
Use Turbo Mode with air conditioning to
quickly circulate air in your home.
1. Tap and select Turbo Mode.
show on the display.
2. The tower fan automatically starts
oscillating and operates at fan speed 12.
3. When the room temperature drops 3°C,
the fan speed will decrease to 6, then
the tower fan will automatically adjust fan
speed according to the room temperature.
10
to select a different
Tap to change fan
Note: You can turn off oscillation by tapping
on the tower fan or pressing
Auto Mode
Use Auto Mode for automatic fan speed
adjustments according to the room
temperature.
1. Tap
will show on the display.
2. The starting fan speed is determined by
the current room temperature.
Room
Temperature
≤ 21°C
22°C
23°C
24°C
25°C
26°C
27°C
28°C
29°C
30°C
31°C
> 31°C
Note: The max ambient working temperature
is 40°C.
will
3. Optionally,
the fan speed while in Auto Mode. The
tower fan will then operate according to
the following logic:
a. If the temperature increases 1°C, the
fan speed will increase one level.
b. If the temperature decreases 1°C, the
fan speed will decrease one level.
on the remote.
and select Auto Mode.
Fan Speed
1
2
3
4
5
6
7
8
9
10
11
12
tap to manually adjust