Cosentino silestone Integrity Einbauanleitung Seite 12

SILESTONE ® INTEGRITY INSTALLATION
EC Declaration
of Conformity
Declaration of Conformity to the
European Union directives.
Cosentino S.A. declares under its
sole responsibility the conformity
of the products under the Integrity
brand.
Use: Domestic use, to which this
declaration refers, in accordance
with the relevant standards or
other standardising documents.
Note
COSENTINO S.A recommends the
use of one of the two anchorage
kits in all models of Integrity
sinks to ensure a safer and firmer
fastening.
COSENTINO S.A declares that the
use of one of the two anchorage
kits is necessary for the Integrity
DUE XL sink and therefore
mandatory for this model. Any
damage resulting from the
incorrect installation of the sink
shall be borne by the fitter and not
by COSENTINO S.A.
If you wish to fit a waste
disposal unit, COSENTINO S.A.
recommends that it be equipped
with a system that absorbs the
vibrations emitted, such as a
soundproofing plate, and that the
necessary plumbing connections,
both to hold the disposal unit and
to connect it to the water outlet,
be made of flexible PVC.
If you wish to fit a boiling water tap
(e.g. Quooker®), COSENTINO S.A.
recommends that the water never
falls directly into the Integrity
sink by Silestone. This type of tap
has been tested with different
cycles of hot and cold water, at
temperatures up to 96ºC. Any
liquid at a higher temperature has
not been tested and could damage
the sink, rendering it out of the
COSENTINO warranty.
EN → INSTALLATION GUIDELINES