Proper Use; Technical Data - Matrix Pg 2300 Originalbetriebsanleitung

(LWM) are emission values and not necessarily
reliable workplace values. As there is a correlation
between emission and immission levels, the
values are not a reliable basis for deciding on any
additional precautions which may be needed.
Factors influencing the actual user immission
level include the properties of the work area,
other sound sources etc., the number of machines
and other processes in the vicinity, as well as the
time span in which the operator is subjected to
the noise. Also, the permitted immission level can
vary from country to country. Nevertheless, with
this information the user is able to make a better
assessment of the dangers and risks involved.
- Never use faulty or damaged electrical
equipment (this also applies to extension cables
and plug connections).
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety
regulations and instructions may result in an
electric shock, fire and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.

3. Proper use

The device is designed for applications operated
with a 230 V alternating current source.
Be sure to observe the restrictions in the safety
instructions. The generator is intended to provide
electric tools and light sources with electricity.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case
of misuse. The user / operator and not the
manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.

4. Technical data

Generator type:
Protection type:
12
Continuous rated power Prated (S1):
Maximum power Pmax :
Rated voltage Urated:
Rated current Irated:
Frequency Frated:
Drive engine design:
Displacement:
Fuel type:
Tank capacity:
Engine oil:
Consumption at 2/3 load:
Weight:
Guaranteed sound power level L
Power factor cos φ:
Power class:
Max. temperature:
Max. altitude (above mean sea level):
Spark plug:
Operating mode S1 (continuous operation)
The machine can be continuously operated with
the quoted power output.
Operating mode S2 (temporary operation)
The machine may be temporarily operated
with the quoted power output. Afterwards the
machine must be stopped for a while to prevent
it from overheating.
5. Layout
1 Tank indicator
2 Fuel cap
3 230 V~ socket-outlets
4 Motor
5 Earth connection
6 Overload cut-out
7 Voltmeter
8 Oil filler plug
9 Oil drain plug
10 Oil shortage cut-out
Synchronous
11 On/Off switch
IP 23M 12 Choke
Single-cylinder forced air-cooled 4-stroke OHV
Appox.0.6 l (15W40/<0
2.1 kW
2.3 kW
2* 230 V~
9.1 A
50 Hz
212 cm
Normal unleaded petrol
o
C: 5W30)
1.5 L/h
38 kg
: 96 dB(A)
WA
40 °C
1000 m
LD F7RTC/ F6TC
3
15 l
1
G1