Brita Cube Gebrauchsanweisung Seite 9

08. Trouble Shooting
Problem Possible reason
E1 High temperature protection
E2 Problem with the temperature
sensor at the water inlet
E3 Problem with the temperature
sensor at the water outlet
E4 UVC-LED issue
Machine is
Machine is locked
not working
The water tank is not
Machine is not
inserted correctly
dispensing
water
Machine is locked
The water flow Water inlet is blocked by
rate is too slow impurities
The hot water
The machine's internal
temperature is
programme has not adjusted
too low
Potential solution
After stopping the operation, choose room
temperature water
Please contact BRITA customer service
Please contact BRITA customer service
Please contact BRITA customer service
Unlock child lock
Insert the water tank from top to bottom and make
sure that the hook on the back of the water tank
fits properly into the recess in the machine
Unlock child lock
Check whether the connection between the water
tank and the machine is blocked
Run 4 cups of water at a temperature of 95° so that
the appliance adapts to the current environment
and can then be used normally. If the problem
persists please contact BRITA customer service
EN
9