Attention:
The ambient temperature, the temperature of the just stored food and the frequency of the door being opened have
an effect on the temperature in the appliance. Take this into account when adjusting the temperature.
• Never place dangerous, highly flammable or explosive substances such as alcohol, acetone or petrol in the appliance
because there will be a danger of explosion.
• A 5-minute delay function is used to prevent damage to the appliance's compressor when you remove the plug and
insert it in the socket again to switch the appliance on or during a power interruption. Your appliance starts working
normally again after 5 minutes.
5
placing food in the appliance
The appliance is used for storing deep-frozen products, freezing fresh foodstuffs and making ice cubes.
• Do not freeze too much at once. The quicker the freezing process, the longer the quality of the food is maintained.
• Ensure that the foods are properly packaged, so that flavour is maintained and no odour is given off to other foods.
foodstuffs.
• Place the deep-freeze products in the freezer compartment as quickly as possible after purchase. Make sure they do not
defrost during transport.
• The storage of fresh, frozen and deep-freeze products depends on the type of food.
• Always write the packaging date and contents on the packaging if you want to freeze leftovers.
• Do not place glass bottles or cans in the freezer compartment. These can break when the contents freezes. Carbonated
drinks could even explode. Therefore never store lemonade, beer, wine, champaign, etc. in the freezer compartment.
• Once the foods have defrosted, they may never be frozen again. Cook or bake them before you can freeze them again.
• In the case of a power interruption or breakdown, the freezer section will retain a temperature that is low enough to
store the foods. But try not to open the door of the freezer section too often so the
temperature in the freezer part does not increase.
6
cleaning and maintenance
Before cleaning the appliance, switch it off with the on/off button and remove the plug from the wall socket.
Remove the food from the appliance. Clean the interior of the appliance. Use warm soapy water with a neutral cleaning
agent to prevent nasty smells. Wipe the inside of the appliance after cleaning with clean water and properly wipe everything
dry. Leave the appliance to dry for 1 to 2 hours. The drawers can be removed from the appliance easily and washed by hand.
These components may never be cleaned in the dishwasher.
For areas in the appliance that are difficult to clean, such as small openings or corners, it is recommended wiping them clean
regularly with a soft cloth or brush. If necessary, a tool can be used, such as thin sticks (cocktail sticks, for example), to make
sure no contamination can occur in these areas.
Clean the outside of the appliance and the door rubbers with a soft damp cloth.
Clean the back of the appliance and the surface on which it stands at least once a year with a vacuum cleaner, so that the
ventilation holes remain clean and the appliance is able to function as well and energy efficient as possible.
Do not use hard brushes, steel wool, abrasives (such as toothpaste), organic solvents (such as alcohol, acetone, oil, etc.),
boiling water, acid or alkaline product to clean the appliance, as this could damage the surface and/or interior of the
appliance. Boiling water and benzene could deform or damage plastic components.
DEFROSTING
The freezer section of this appliance is frost-free - No-Frost. If used correctly, no ice will be formed.
Dry and cold air is evenly distributed in the freezer and freezer compartments by means of the fan.
Cold air distributed between the drawers will evenly cool all your food, as a result of which humidity and frost are prevented.
So your No-Frost freezer offers ease of use, besides the enormous capacity and stylish appearance.
Replacing the LED lighting
This appliance has been provided with a LED lamp. This lamp lasts for a longer period of time. When the
LED lamp in the appliance is broken, you are not able to replace it yourself. Contact the Inventum service
LED
LED
department.
23
English
•