Remote Controller - Eachine Ex 2 Mini Bedienungsanleitung

[13]
Remote controller
Remote controller
I. Keep pressing the red locking button and turn on the remote controller.
2. Push down the calibration button (shown as pic.l) and hold on for 3 seconds, the remote controller
will make 3 beep sounds and the indicator light of the remote controller turns from flashing quickly to
slowly. Maximum rotate both of the left and right control stick to any direction for 2 circles (shown as
pic.2).
3. Then, again, push down the calibration button and hold on for 3 seconds, The remote controller will
send out 3 beep sounds and the indicator light of the remote controller tums from flashing slowly to
quickly, which means that the control stick calibration is completed.
Warm tips: All remote controllers have been calibrated when manufacturing.

Remote controller

control sticks are not working normally.
Attention: Please do not power on your aircraft when calibrate the control stick for the remote
controller.
o
control stick
Ooo
calibration is requested
-4-
[14)
[13] 3D flips & rolls button
[14] Null button
calibration
only if pilots find that the remote controller