Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2 - QUICK NETWORK SETUP
Login to the web viewer
1. Once the camera is connected to the network, start the eneo Site Manager
(download from www.eneo-security.com).
A list of cameras connected to the local network is displayed.
2. By default, the camera is set to DHCP. If there is no DHCP server on the network,
the camera will switch to a default IP address after a while. In this case, add
only one camera at a time to the network to avoid conflicts due to identical IP
addresses. The default IP address of the network camera is 192.168.1.10.
3. Right-click on the device name in eneo Site Manager to open the context menu.
Use the Open Web Interface option to access the camera.
4. The Web Viewer login page opens in the web browser of your choice.
5. Enter the default access data once.
User name: admin
Password: admin
6. You must then change the password.
7. From now on, you can access the camera settings.
Note!
Screenshots may be shown in german, for questions contact the support.
14
Werbung
