VEVOR IOG-1 Bedienungsanleitung Seite 16

Screen
The filters were washed once a month, Method: As shown in the figure,
use a small cross screwdriver to break the filter fixing screw, pull out the
filter and then soak it in 40'℃ warm water mixed with neutral lotion, wash
the debris on the filter with a brush, and put it in a cool place. Then install
it in the original position again and fix it with screws.
Surface cleaning
Wipe with a neutral lotion or alcohol and wet cloth, and then dry with a dry
cloth.
Save method:
Save at the end of the season
① Shut down, unplug the power supply.
② Wipe the surface of the machine with a damp cloth, and then dry it with
a dry cloth.
③ Roll up the power cord with a rope.
④ Slant the machine slightly to the side with the leakage hole and stand
for half an hour until all the residual condensed water in the machine
flows out.
⑤ Cover the machine with plastic bags and put it in a dry place.
Technical Support and E-Warranty Certificate
www.vevor.com/support