Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Sleep mode: enter sleep mode, the temperature setting is automatically
set to 26'c, and the wind speed set to "LOW" can be set by the [+ /-]button
or remote control.
Dehumidification mode: entering the dehumidification mode, the
temperature setting automatically switches to 18'C. Furthermore, the
temperature cannot be modified and reset, and the wind speed is set to
"HlGH".
Air supply mode: Enter the air supply mode, and the wind speed is
automatically set to "HlGH". Temperature is shown as 30'c, but as the
actual ambient temperature of the wind, After 5 seconds, the compressor
automatically closes, and the wind speed can be set through the button.
Atmosphere light setting.When the air conditioner is turned on, the
atmosphere light is automatically turned on. Tap the button [on / off] key to
turn the atmosphere light on or off.
Drainage setting
When the air conditioner is on, when the compressor is running, long press
the button to open or close the drainage function. When the drainage
function is off, the water leakage alarm starts when
the water level sensor works, the air conditioner stops working, and the
overflow icon flashes on the display screen.
Show the icon
Display types: refrigeration, heating, sleep, dehumidification, air supply,
atmosphere lamp, timer, wind speed industry, wind speed drop, drainage,
temperature, Celsius, Fahrenheit, overflow water
* lf the display is not used, the screen will automatically close after a minute
and will light up again after pressing any button.
* Prevent overflow overflow flashing when the condensate is full.
* When the cooling/heating/sleep/dehumidification /wind speed mode is
set, the corresponding mode icon will be displayed, and the other mode
icons are not displayed.
* When the time is set to the timer mode, the timer display will blink, and
After the time setting completes, the timer display will no longer flash
Werbung
