A
TROUBLESHOOTING
Q: My device doesn't find the headset on the Bluetooth
device list
→
Check if the Bluetooth headset is powered on; if it is
powered on and still doesn't connect, reboot both
devices.
Q: After connecting the headset, disconnection or noise
occurs.
→
Check if the headset is sufficiently charged.
→
There may be obstruction between both devices, or the
Bluetooth range may be overextended.
SPECIFICATIONS
Driver size
Frequency response
Impedance
Sensitivity
Bluetooth version
Bluetooth range
Sound channel output
SNR
Play time
Standby time
Charging time
Battery type
Battery Capacity
8
40 mm
20-20 KHz
32 Ω
100 ±3 dB
5.3
> 10 m
Stereo
> 90 dB
± 30 h
± 200 h
± 2.5 h
Li-polymer
250 mAh
SAFETY INFORMATION
• Do not place the headset in a high temperature environ-
ment or directly exposed to the sun.
• Do not place the headset in an excessively moist envi-
ronment or submerged into water, keep the headset dry.
• To prevent hearing damage, make sure that the volume
on your music player is turned down before connecting
your headphones. Noise levels are measured in decibels
(dB). Exposure to any noise at or above 85 dB can cause
gradual hearing loss.
• Do not use the headset in an unsafe environment: while
operating a vehicle, crossing streets, or during any
activity or in any environment where your full attention to
your surroundings is required.
Warning: Prolonged listening to music at
high volume can cause permanent hearing
damage.
A
9