Konix Naruto Shippuden Bedienungsanleitung Seite 4

A
BLUETOOTH PAIRING
• Power on the headset; the headset automatically enters
pairing mode when turned on.
• In case the headset is not in pairing mode, keep on long
pressing the multifunction button for 5s to turn on the
Bluetooth pairing mode, until the LED starts flashing
alternately blue and red.
• On your device, select «KX-NARUTO-GH» from the
Bluetooth device list to pair the headset.
Connection to a device
from the device list or
Successful
automatic reconnection
connection
to a device
6
CONTROLS
AUX-IN
• Plugging in a 3,5mm cable will automatically switch to
• When using AUX-IN mode, audio and volume control
OTHER FUNCTIONS
Steady blue
• If the headset is left idle and link is lost, the blue and red
LED for 3s
• If the headset is running on low battery, then the red
Play/pause Press the multifunction button
Volume up Press the volume up button
Volume down Press the volume down button
Next track Long press the volume up button
Previous track Long press the volume down button
Answer/hang up
Short press the multifunction button
incoming calls
Reject calls Long press the multifunction button for 2s
Double press quickly on the multifunction
Call back
Turn on voice
Press the dedicated voice assistant button
assistant
AUX-IN mode, and Bluetooth mode will turn off.
need to be done on the device.
LEDs will flash alternately
LED will flash 2 times every 30 seconds until it is plugged
into a charging source.
A
button
7