Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Plug in and switch on the refrigerator by pressing on the power button for a few
seconds.
When you use the refrigerator for the first time (or restart the refrigerator after
having it shut off for a long time), there will be a few degrees variance between the
temperature you have selected and the one indicated on the LED readout. This
is normal and it is due to the length of the activation time. Once the refrigerator is
running for a few hours everything will stabilize.
IMPORTANT: If the unit is unplugged, power is lost, or turned off, wait 3 to 5
minutes before restarting the unit. The refrigerator will not start if you attempt to
restart before this time delay.
Control Panel Lock
The unit is equipped with an automatic control panel lock function. This function
will prevent any unwanted changes to your temperature or power settings. The
lock function will activate automatically 5 seconds after the last time a button is
pushed on the control panel.
UP
DOWN
To unlock the control panel lock, press and hold both the
and
buttons
for 5 seconds the control panel will beep and blink once indicating that the control
panel is active and the settings can be changed. You must unlock the control panel
every time you want to set the temperature, change the display setting (°F/°C) turn
on or off the light and to power off the refrigerator.
Control Panel For The Refrigerator
Single Zone
- 10 -
Werbung
