EcoFlow Smart Meter Benutzerhandbuch Seite 8

Button and LED Indicators
Reset Button
Power Status Indicator
Wi-Fi Status Indicator
RS485 Status Indicator
04 |
̛ Press and hold for 5–10 seconds to start device pairing.
̛ Press and hold for over 10 seconds to restart the device.
̛ Off: The device is powered off.
̛ Solid Green: The device is powered on and functioning
normally.
̛ Solid Orange: Indicates one of the following conditions:
1. The current household load is too low to be measured.
2. The CT (Current Transformer) is not detected. Ensure the
CT is properly installed and clamped.
̛ Off: The device is not connected to a wireless network.
̛ Solid green: The device is connected to the internet via a
wireless network.
̛ Breathing green: The device is upgrading the firmware.
̛ Solid orange: The device is connected to a wireless network,
but internet access is unavailable.
̛ The RS485 terminals and LED indicator are reserved for
factory use.