Cranking Test; Charging Test - Autool Bt760 Bedienungsanleitung

Cranking
test
Charging
test
After the battery test is completed, press the [
select the starter system test, and press the [
test state.
Battery Test

Cranking Test

Charging Test

Languages
In the main menu, press the [
system test. Press the [
the engine. After waiting for stable operation, press the [
to display the test status.
Battery Test Cranking Test
Charging Test
Languages
NOTE:
Please do not shut down the engine during the test. Other electri-
cal equipment should be turned off. If any electrical appliances in
the car are switched on or off during the test, it can affect the
accuracy of the test results.
Under different engine operating conditions, the battery
voltage will be different. Under normal conditions, the charging
voltage will not be lower than the minimum value of 13.3V, and it
should not be higher than 15.0V at high speeds.
Charging voltage is too low:
Starter System Test
Current voltage:
Minimum voltage:
Start
Min Value
Load Test
>>Please start the engine
and wait 15 seconds.
Help
] key to enter the test. At this time, start
>>Please start the engine
and wait 15 seconds.
>>Press <OK> to continue!
Load Test
Help
14
Starter System Test
Current voltage:
12.36 V
Minimum voltage:
12.36 V Start
> 9.6 V Min Value
] keys to select the charging
Charging System
20
10
Battery Volt.
Min Voltage
Max Voltage
Normal Voltage
] keys to
] key to enter the
12.36 V
12.36 V
> 9.6 V
OK
] key
12.56V
12.55V
12.56V