Profi Cook PC-WKS 1013 Bedienungsanleitung, Garantie Seite 38

• If the set temperature has been reached,
the element will switch off automatically. Five
buzzers sound. The ON/OFF button light
continues to flash slowly. The set tempera-
ture is shown on the display.
• The warming function is activated for
2 hours. This is indicated by the flashing
ON/OFF button. The display keeps showing
the set temperature.
C Boil water to 100°C, cool down to 90°C to
60°C and keep warm
• Press the ON/OFF button. The button
lights up. The heating process starts. The
temperature rise can be seen on the display.
• Press the or button before the water
starts boiling. Set the desired temperature
with the buttons. The selected temperature
flashes quickly on the display for 5 seconds.
The temperature rise can be seen again.
The ON/OFF button light flashes slowly.
• After reaching the temperature of 100°C
the heating element automatically switches
off. You will hear three beep tones. The ON/
OFF button light continues to flash slowly.
• As soon as the water temperature has
decreased to the set temperature you can
hear 5 beep tones. The warming function is
activated for 2 hours. This is indicated by the
flashing ON/OFF button. The display keeps
showing the set temperature.
NOTE:
• Pressing the ON/OFF button or removing
the water kettle from the base immediately
terminates the warming function. The water
temperature in the kettle is indicated on the
display.
• After two hours the appliance automatically
terminates the warming function.
Switching off/Interrupting Operation
There are two ways to stop/interrupt the boiling
process:
38
All manuals and user guides at all-guides.com
• The appliance switches off automatically after
• Press the ON/OFF button again to end the boil-
The ON/OFF indicator lamp turns off.
Do not remove the appliance from the base
without switching it off beforehand.
The terminals on the base are not suitable for
interrupting the power supply.
• When pouring the water out, keep the lid
• During operation the housing becomes hot.
• Remove the mains plug.
• Emptying the water container.
• Clean the appliance as described and allow it to
• We recommend that you keep the appliance in
• Always store the appliance out of the reach of
• Always turn the device off before cleaning
• Never immerse the device or the base in
• Do not use any wire brush or other abrasive
• Do not use any acidic or abrasive detergents.
the water has boiled.
ing process.
CAUTION:
WARNING: DANGER OF SCALDING!
closed.
Do not touch it and allow the device to cool
down before storing it away.
Storage
dry.
the original packaging if it will not be used for
long periods.
children in a dry, well ventilated place.
Cleaning
WARNING:
it and remove the mains plug. Wait until the
device has cooled down.
water or other liquids.
This may result in electric shock or ire.
CAUTION:
objects.