★Note: "Manual mode" is mainly used when there is a certain amount of
honey left in the bottle with unknown weight.For example: a bottle with
1000grams volume and bottle weight 26 grams. There is half a bottle of
honey with unknown weight . At this time, click the "Set" button to set the
weight to 1026 grams.Put this bottle on the tray and press start , then the
machine will fill the bottle to 1000 grams of honey
8.Stainless steel key: both "start " and "emergency stop"
★Note: In "manual mode" , it is the start key. When the machine is
abnormal, it can be the emergency stop key.
MAINTENANCE
1.The user shall select a quantitative filling machine of a suitable range
according to the said products.
2.The machine contains a precision electronic scale, it is forbidden to be
overweight.
3.The Height of filling head can be adjusted to about 10 mm from the bottle
mouth.
4.When in use, please keep the machine level and stable to avoid big
vibrations or impact, otherwise it may cause damage.
5.Machine first use or long time no use, very few will not absorb water,
because the pump is internally dry result. You need to add some water
from the intake pipe to the pump and then start the machine.
6.It is better to clean the machine with clean water after every use, which
can prolong the service life of the pump. .
7.When the machine is not in use, please empty the liquid and store it in a
ventilated and dry place.
8.Please clean the product and the filter in time after each use.
- 10 -