Bluedio U Bedienungsanleitung

o
WWW.
Guangzhou Liwei Electronics
Welcome to use this manual
Thanks very much for your great support to this headset.
To verify the headset
Scrape the anti-fake label on the package for verification
code; Visit our website: www.bluedio.com; Enter the
verification code to verify the headset.
For information and help
Welcome to visit our website: www.bluedio.com;
Or to email us at aftersales@gdliwei.com;
Or to call us at 020-86062626-835.
z
www.
1
Headset Oven.'iew
LED Indicator
Multifunction VolumeUp + Button
Button(MFB)
Previous T rack(<) B utton
NextTrack(>) Button
Audio Jack
Volume Down - Button
ChargingSocket
Built-in Micro hone
Power On/Off
ON: Press and hold the MFB until the LED(red and blue)
lights up, then release the MFB and the headset will issue
"power on".
OFF: Press and hold the MFB until the LED(red and blue)
lights up, then release the MFB and the headset will issue
"power off'.
Enter pairing mode
When the headset is off, press and hold the MFB until the
LED remains blue, then release the MFB. The headset will
issue "pairing", and it is in pairing mode.
www.
3
Skip to next track: press the > Button once
Turn up the volume: press the + Button once
Turn down the volume: press the — Button once
3D sound effect onloff (in Bluetooth mode)
ON: When the headset is playing stereo music, press and
hold the > Button until you hear a beep, release the >
Button. The 3D sound effect is on.
OFF: When the 3D sound effect is on, press and hold the <
Button until you hear a beep, release the < Button. The 3D
sound effect is off.
Line-in music
Connect one plug of the 03.5mm audio cable to the audio
jack of the headset, and connect the other plug to the audio
jack of your mobile phone.
Press once to skip
to previous track
Volume up
(Press and hold to
switch off 3D sound
effect)
Press once to ski
to next trac
Volume down
(Press and hold to
switch on 3D sound
effect)
WWW.
5
o
Bluedio .com
Co.,Ltd
Safety
Precautions
Read this user manual carefully and completely before
using the headset.
1.Should adjust reasonable volume and time when using
the headphone.
2.PIease stop using the headphone if there is any danger to
ensure your safety.
3.Be careful not to turn the volume so high that you can't
hear anything around you. If there is a tinnitus or the volume
is too high, please reduce the volume.
4.PIease avoid using headphone to listen to music, make or
receive calls to avoid distraction while driving.
5.Put this product and its accessories somewhere out of the
reach of children, to avoid inappropriate use by children
which may cause a fatal danger.
6.Should avoid water entering the headphone during
grooming, which may cause damage to the sound quality or
the headphone.
7.Stop using the headphone if you feel obvious discomfort,
irritation or have other adverse reactions.
8.The headphone should not be stored or use at
temperatures below -150C (50F) or above 550C (131 OF)
which may shorten headphone or battery life.
Bluedio . com
Overview
Pair the headset with your mobile phone
1. Keep the distance between the headset and your mobile
phone (or other device) within I meter. The closer, the
better.
2. Make sure the headset enters pairing mode.(See
instruction "Enter pairing mode")
3. Switch on the Bluetooth of your mobile phone,
add/search devices.
4. When "U" appears, select it. (If asked for a pass code:
Enter "0000")
5. When you see the LED flashing blue, the headset and
your mobile phone is in Bluetooth connection.
Attention: If the pairing is not successful within 300 seconds,
the blue LED will go out and the headset is out of pairing
mode. Please repeat the pairing procedure to try again.
2 3
Bluetooth
Enter pairing mode Switch on Bluetooth Add/Search devices
Select "U"
Connect to two mobile phones at the same time:
1 .Keep the distance between the headset and mobile
phones within 1 meter. The closer, the better.
2. Make sure the headset enters pairing mode.(See
instruction "Enter pairing mode")
3.Switch on the Bluetooth of phone 1, add/search devices,
select 'U", connect phone 1 to the headset.
4.Switch off the Bluetooth of phone 1, and power off the
Bluedio .com
Specifications
Specifications:
Bluetooth version: V4.1
Supported profiles: A2DP, AVRCP, HSP, HFP
Transmission frequency range: 2.4GHz-2.48GHz
Bluetooth operating range : up to 10m (free space)
Audio DAC Resolution: up to 24bit@48KHz
Driver units: 050mmx2; @20mmx6
Nominal impedance: 32Q
Frequency response: 5Hz-25KHz
Total harmonic distortion(THD): 0.3% —3%
Sound pressure level(SPL) : 120dB
Bluetooth music time: up to 25hrs
Bluetooth talk time: up to 28hrs
Standby time: up to 1300hrs(about 50 days)
Fully charged time: about 3hrs
Operating environment: -10 to 500C
Specifications are subject to change without notice.
Bluedio . com
Bluedio
User Manual
DIRECTORY
EN
Safety Precautions 1
In the box --------------------------------2
Overview --------------------------------3
Paring - -4
Specifications -----------------------------5
------------6
----------9
--10
4*Jl$ü
11
--------12
Seguridad
-------------------------------13
En la caja -------------------------------14
Descripciöngeneral ---------------15
Emparejamiento --------------------------16
Head specification
------------------------17
— 18
Précaution de sécurlte
Accessoires - --20
Aperqu général du casque —
--21
Mode d'appariement- - -----22
Spécifications du casque • -----23
Foire aux questions — --24
Accessories
Charging and battery
Waming(to avoid damage to the headset)
1. Charging cable: Only use charging cable of standard
Micro-USB(5 PINS). 2. Charger: If you use a charger for
charging, its output DC voltage should be 5V-5.5V, and its
output current should exceed 500mA.
Charge the headset
The built-in battery of the headset is rechargeable and non-
detachable. Do not replace the battery.
I . Power off the headset before charging.
2. Connect the Micro-USB plug(the smaller plug) of the
charging cable to the charging socket of the headset;
Connect the other plug to the USB socket of your computer
or other charging device. The LED remains red and the
headset is being charged.
3. When the headset is fully charged(takes about 3hrs), the
LED remains blue.
To a USB charger
Or other charging device
www. Bluedio
Pairing
headset.
5. Make sure again the headset enters pairing mode.(See
instruction "Enter pairing mode")
6. Switch on the Bluetooth of phone 2, add/search devices,
select "U", connect phone 2 to the headset.
7. Switch on again the Bluetooth of phone I, and the
headset will connect to it automatically.(lf automatic
connection fails, please pair again phone I with the
headset)
8. The headset connects to two mobile phones at the same
time.
Reconnect the paired headset to your mobile phone
I .Keep the distance between the headset and your mobile
phone within 1 meter. The closer, the better.
2.Power on the headset, and it will enter reconnecting mode
automatically with the LED flashing blue.
3. Switch on the Bluetooth of your mobile phone, and the
headset will automatically connect to your mobile phone. (If
automatic connection fails, please pair again the headset
with the phone)
Disconnect the headset with your mobile phone
I. Power off the headset .
2. Or switch off the Bluetooth of your mobile phone.
3. Or leave the headset 20m (60ft) away from your mobile
phone or farther.
Use the headset to talk on the phone(in Bluetooth
mode)
*in Bluetooth mode: the headset and your mobile phone is
in Bluetooth connection. (See instruction "Pair the headset
with your mobile phone")
www. Bluedio
FAQ
1 .Headphone cannot pair with mobile phone.
Solution: Please check whether your headphone is in
pairing mode or reconnection mode, check whether
Bluetooth search function of your mobile phone has been
opened. Thus, check your mobile device's Bluetooth menu
and delete/forget the headphone, reconnect the headphone
following instructions of user manual.
2.Headphone cannot be switch on.
Solution: Please check the battery status of your
headphone.
3.Can I change battery for the headphone?
Solution: No, this headphone use a built-in non-detachable
Li-Polymer battery, it cannot be removed.
4.Can I use headphone while driving?
Solution: For safety reason, we strongly recommend not to
use over-ear headphone to avoid distraction while driving.
5.Headphone disconnect with your mobile phone within
10 meter.
Solution: Please check if there is metal or other material
within relatively close range may interfere Bluetooth
connection, as Bluetooth is a radio technology that is
sensitive to objects between the headphone and the
connected device.
6.Cannot hearing a sound from your computer or
mobile phone.
Solution: Please check whether the output channel of your
computer is Bluetooth Audio Device and Bluetooth function
of your computer support A2DP profile. And please check
volume of your headphone, and computer/mobile phone.
7.Cannot hearing a sound from source and audio
streaming application.
Solution: Check the source of streaming audio is on and
playing. Or check that the device supports A2DP audio
streaming. Or try other source / audio streaming app or try
another track. Or check the Bluetooth device volume is at a
high level and not muted. Or place the device to
WWW. Blued•o
Bluedio
DE
Sicherheitsvorkehrungen----
-25
Zubehör - ----------26
Übersicht über Kopfhörer
------27
PairingModus - ------------------28
Kopf Spezifikation- --29
FAQ---- ------------30
--31
750#1)—-- -----------32
--33
----------------35
& < 56%8-----------------------------36
nyHKTbl 6e30nacHOCTh-------------
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ 37
KorvqnneKTaL41,19- ----------38
PYKOBOACTBO -----------------------------39
napaMeTpbl -
T MTIMMHble BonPOCbl -------------------------43
Informazioni di sicurezza importanti - -
Vista generale delle cuffie- -
--------45
Entrare nella modalitå abbinamento- - - - - 46
Specifiche--------------------------------48
FAQ
Battery level Low-batery alarms
LED indicator
When the headset issued per 20 seconds
flashes red
voltage is below
3.4V, the headset will
issue low-battery
alarms.
In the box
03.5mm Audio Charging cable xl
Bluetooth
headsetxl cablexl
Portable case
User Manual xl
with a buckle xl
.com
Answer a call
When there is a call, the headset will issue a ring tone.
Press the MFB once to answer it. Or use your mobile phone
to answer it.
End a call
When you are on call, press the MFB once to end it. Or use
your mobile phone to end it.
Reject a call
When there is a call, the headset will issue a ring tone. To
reject it, press and hold the MFB for around 2 seconds, then
release the MFB. Or use your mobile phone to reject it.
Redial last number
Press the MFB twice.
Call waiting (need your mobile phone to support)
When you are on call 1 , there comes call 2:
1. To end call 1& answer call 2: press the MFB once
2.To retain call I & answer call 2: press and hold the MFB
for around 2 seconds, then release the MFB
When you are on call 2, and call I is still retained:
3. To switch to call 1 & retain call 2: press and hold the MFB
for around 2 seconds, then release the MFB
4. To switch to call I & end call 2: press the MFB once
Voice control (need your mobile phone to support)
Press and hold the MFB for around 2 seconds, then release
the MFB.
Control track I Adjust Volume(in Bluetooth mode)
Pause /Resume track: press the MFB once
Skip to previous track: press the < Button once
.com
headphones (10 meters). Or take device and headphones
away for any device that may cause interference, like other
Bluetooth devices, cordless phones, microwave ovens or
wireless computer network routers. Or reduce the number of
applications running on the device. The audio quality will
also be improved by turning off the Wi-Fi functionality of the
device.
8.Cannot use the headphone to control volume or select
track of APP of your mobile phone.
Solution: Software settings of APP may be varied led to
some functions of the APP may not control by the
headphone.
9.Cannot charge the headphone.
Solution: Make sure both ends of the USB cable are
securely connected. If you use a power outlet, ensure that
the power supply is connected securely and the outlet
works. If you use a computer, make sure it is connected and
the USB port is powered. Turn on the headphone and then
turn them off. Disconnect and reconnect the USB charging
cable.
- .com
2
4
6