EDIFIER S350DB Schnellstartanleitung Seite 9

Bluetooth Input
Pairing
1. Turn on speaker and switch to Bluetooth mode by pressing the Bluetooth button on the remote
control or press the master volume control on the active satellite speaker until Bluetooth icon
comes on.
2. Go to setup on your source devices (mobile phones, tablets, etc.) and search for nearby
Bluetooth devices, you will find "EDIFIER S350DB" in the list.
3. Pair your device with "EDIFIER S350DB".
4. Play audio tracks on your device and adjust the volume to a desired level.
5. To disconnect from the current Bluetooth device, press and hold the "
remote control for 2 seconds.
Note:
1. Bluetooth on the product can be searched and connected only when speaker is ON and switch
to the Bluetooth input. When the speaker is switch to other audio inputs, the Bluetooth
connection will be disconnected. When switched to Bluetooth input, the speaker will try to
connect the last connected Bluetooth source device.
2. Bluetooth connectivity and compatibility may be different among different source devices,
depending on the software version of source devices.
3. To enjoy all Bluetooth functions of this product, make sure that your audio source device
supports A2DP and AVRCP profiles.
4. PIN code for connection is "0000" if needed.
5. The built-in Qualcomm® aptX™ decoder in the product helps to achieve better wireless
transmission sound quality, therefore please use the device supporting Qualcomm® aptX™ as
the audio source.
COAX OPT
OPT COAX
PC AUX
AUX PC
or
" button on the