Whirlpool KBT 6424 DO (BI) Bedienungsanleitung Seite 18

Programmed time display
If one or more plates have been programmed, the dis-
play shows the time remaining for the plate which is
closest to the end of the programmed time, indicating
its position by means of the corresponding indicator light,
which will be on. The indicator lights that correspond to
the other programmed plates will flash.
To show the time remaining for the other programmed
plates, press repeatedly; the times of all the pro-
grammed plates will be shown in sequence, in an anti-
clockwise direction, beginning from the front left one
(only the corresponding indicator light will be on and the
display flashes)
Modification of programmed times
Proceed as per the paragraph "Programmed time dis-
play" until the time of the plate you intend to modify is
shown. Press the keys "+" and "-"
new time. Confirm by pressing
without pressing any keys.
Cancelling a programme
Display the time of the plate concerned (as in the para-
graph "Programmed time display") and press the keys
"+" and "-"
is reset and you exit the programming mode.
19
to set the
or wait 10 seconds
simultaneously; the programme