FeinTech AX211 Bedienungsanleitung Seite 9

3. Connect the HDMI input (NOT the HDMI ARC/eARC port!) of your audio device to the HDMI
audio output
4. Connect the power supply unit to the AX211 and plug it into a power socket. Then switch on
your display, followed by the external player.
Caution: When plugging and unplugging the HDMI cables, make sure that the plug contacts are not
dirty or damaged. Make connections without power and switch on the devices only after they have
been connected. Please also ensure that the HDMI cables are of good quality - especially for 4k
transmission.
EDID switch and management
Via EDID (Extended Display Identification Data), a TV, AV receiver or projector connected via HDMI
signals its capabilities (including supported picture resolution and sound formats) to the source
player. Then the HDMI source automatically outputs the best supported signal. This is to play only
video or audio formats that can be processed. With the EDID switch, you can set which EDID is to
be used for your configuration.
In the COPY position, the EDID of the display is used. This means that the input device behaves as
if it is connected directly to the display. When connected to a monitor or video projector without
speakers, no sound, or only stereo sound, can therefore be played. Then change the EDID via the
dip switches according to the maximum desired audio format.
The EDID mode is set via the 3 dip switches:
Dip Video
111 COPY*
001 COPY*
000 COPY*
110 4K 60Hz 4:4:4
101 FRL12G 8K HDR
100 FRL12G 8K HDR
011 FRL12G 8K HDR
010 FRL12G 8K Dolby Vision
*COPY means, the original EDID data of the connected display is used
FRL12G allows a maximum data rate of 48 Gbps,
Notes:
7.1 audio formats such as Dolby TrueHD or DTS-HD as well as the 5.1 audio format DTS are not
processed by some TVs. If the EDID setting nevertheless forces the output, such a TV will remain
mute. If a video format that is too high and not supported by the display is forced, the picture will
Audio
COPY*
Audio 5.1 DTS/Dolby/PCM 2.0
Audio 7.1 DTS/Dolby/HD/PCM7.1 (recommended)
Audio PCM 2.0
Audio PCM 2.0
Audio 5.1 DTS/Dolby/PCM 2.0
Audio 7.1 DTS/Dolby/HD/PCM7.1
Audio 7.1 DTS/Dolby/HD/PCM7.1
9