Zendure SolarFlow 2400 AC Bedienungsanleitung Seite 8

EN
Position your Inverter and batteries (not included) on a hard, level floor.
5.2 Assembly Process
5.2.1 Remove the Protective Cover
5.2.2 Connect to the Battery
(1) Place the SolarFlow 2400 AC on Zendure AB3000X Battery.
A single SolarFlow 2400 AC can be connected to up to 6pcs
AB3000X batteries in parallel.
(2) Use the mounting brackets and M4 screws to securely attach
the SolarFlow 2400 AC to the battery pack on both sides.
(3) Use the brackets and expansion screws to firmly fix the
SolarFlow 2400 AC to the wall.
5.2.3 Connecting to the Grid via a Power Socket
The inverter's peak power can reach 2400W. To prevent circuit overloads or tripping, connect the inverter to
a socket on the dedicated circuit, without any other appliances sharing the same circuit.
The inverter is set to a default output power limit of 800W. If you need to exceed this limit, please have
a licensed electrician visit your location to assess the safety of your circuit and ensure it complies with
safety standards. After the electrician's verification, you can apply to increase the power to 2400W via
the Zendure App.
Electric Meter
Grid
Circuit Breaker
Circuit Breaker
Distribution Box
Circuit Breaker
8
Phase A
Phase B
Phase C