insize 8701 Bedienungsanleitung Seite 14

10. MAINTENANCE
1. Disconnect the power supply when cleaning the moisture analyzer.
2. Ensure no liquid enters the moisture analyzer.
3. Please ensure that the moisture analyzer is in the cooling state before cleaning.
» Clean the instrument regularly.
» The cover surface and temperature sensor can be slightly dipped in a lint-free cloth or neutral cleaning agent
scrub.
» Glass surface can be cleaned using glass cleaning agent.
» Do not use solvents, irritating chemicals such as ammonia and abrasive solvents.
11. RS232C
This instrument is equipped with RS232C interface for connecting peripherals (printers, computers).
In order to successfully connect the instrument to peripheral equipment, the following conditions must be met:
» Connect instruments using cables that match peripheral interfaces.
» Communication parameters (baud rate, data bits and parity bits) of the instrument and peripheral devices must
match. This data exchange is asynchronous using ASCII codes.
2------TXD
3------RXD
5------GRD
2----------2
9 pin 3----------3 9 holes
5----------5
2----------2
9 pin 3----------3 25 pin
7----------7
www.insize.cz www.insize.sk www.insize.hu www.insize.at