Taurus R950 Gebrauchsanleitung Seite 10

NOTE: It is not necessary to remove the water tank
completely. However, if you do, first remove the pump
from its anchorage and ensure that the pump and tank are
positioned correctly after filling.
NOTE: There is another way to fill with water: Open the
upper water inlet and fill with water, making sure that the
water tank is in place and taking care not to exceed the
maximum level I in the water tank.
USE
• Extend the supply cord completely before plugging it in.
• Connect the appliance to the mains.
• Make sure the air outlet fins are open.
• Guide the appliance to direct the flow of air in the desired
direction.
• Turn the appliance on, by using the on/off button.
• The led display comes on.
FAN FUNCTION
• Select the desired fan mode by pressing the mode button.
- Normal: The fan runs at the selected speed.
- Natural: Fan speed varies automatically to simulate a
breeze, creating a soft and comfortable environment.
- Night: Fan speed varies automatically for use during
sleep.
• Select the desired speed by pressing the speed selection
button.
COOL FUNCTION
• The appliance has a the Cool function button that allows
getting the control of the COOL function.
• By pressing this button, the expelled air becomes cooler
and wet.
• The water tank lasts 6h.
• When the water tank is empty, the appliance stops the
COOL function.
• Do not use this function without water in the tank.
• The product is supplied with 2 ice packs. To cool water
further, fill them with water and place them in the freezer.
Once frozen, place them in the water tank.
TIMER FUNCTION
• The appliance's operating time can be controlled.
• To program the operating time simply select it using the
timer button and press it repeatedly to set the desired
time (0-12h).
• Once the selected time has elapsed, the device will turn
off automatically.
OSCILLATION FUNCTION
• The oscillation function makes it possible to direct the flow
from the apparatus so that it automatically alternates over
a range of 75º.
• To activate/deactivate this function, press the swing
button.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Turn the appliance off using the on/off button.
• Unplug the appliance from the mains.
• Remove the water from the water tank.
• Clean the water tank.
• It is necessary to change the water every 72h.
• Clean the appliance.
EMPTYING/ CLEANING WATER TANK
• Remove the water tank and empty it.
CARRY HANDLE(S)
• This appliance has handles on the sides of the which
facilitates comfortable transport.
CLEANING
• Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
• Clean the electrical equipment and the mains connection
with a damp cloth and dry. DO NOT IMMERSE IN
WATER OR ANY OTHER LIQUID.
• Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
• Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
• Do not let water or any other liquid get into the air vents to
avoid damage to the inner parts of the appliance.
• Never immerse the appliance in water or any other liquid
or place it under running water.
• Never submerge the connector in water or any other liquid
or place it under running water.
• If the appliance is not kept in a good state of cleanliness,
its surface may deteriorate and this will inevitably affect
the life of the appliance and make it unsafe to use.
CLEANING THE FILTER
• If the filter is very dirty, immerse it in warm water with
a little cleaner and rinse it several times - the water
temperature must not exceed 40°C.