Bestway ColorJet Bedienungsanleitung Seite 3

OPERATION
• Turn on the HydroJet™ massage function of
your Hot Tub and the light will be on.
• Press the button: Change the light show.
• Press and hold for 3 seconds: Turn off.
• Press again: Turn on.
• Twist the light to adjust the water flow and
LED brightness.
Important: When the water flow of the
HydroJet™ massage system is set to
minimum flow, the power of the water will be
not enough to activate the light. Use the
maximum power of water flow to
enjoy the light.
MAINTENANCE
Store in a dry place when not in use.
3
+
-