Cub Cadet XM2 DR46SA Originalbetriebsanleitung Seite 8

EN
Contents
Meaning of the symbols..................................... 8
For your safety................................................... 9
Safety information.............................................. 9
Intended use ...................................................... 13
Identification plate.............................................. 13
Safety equipment............................................... 13
Assembly ........................................................... 14
Operating controls ............................................. 14
Start-up .............................................................. 14
Servicing ............................................................ 19
Storage .............................................................. 21
Transport ........................................................... 21
Troubleshooting ................................................. 22
Information on the engine .................................. 23
Warranty ............................................................ 23
CE Declaration of Conformity ............................ 23
Environmentally-friendly disposal ...................... 23
8
Meaning of the symbols
Warning!
Read the operating manual prior to
installation and start-up!
Caution! Danger for bystanders
Keep other people away from the danger
area.
Warning! Rotating blades
Injury hazard due to rotating blades or
other moving parts. Keep hands and feet
away from the blades.
Danger! Unintended switching on
Prior to working on the device, pull off
the spark plug connector. Keep hands
and feet away from rotating parts.
Danger! Unintended switching on
Prior to working on the device, remove
the ignition key. Follow the instructions in
this manual.
Danger! Pull out the mains plug be-
fore adjustment, cleaning or servicing
and if the power cable is damaged.
- When using mains powered machines.
Caution! Keep power cables away
from the cutter deck.
- When using mains powered machines.
Note
Always keep these symbols in a legible
condition. Replace damaged or illegible
symbols.
Contents
769-12423C