Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WARNING:
REGARDING
USE OF NOWD
been built to Jdbug design specifications. All the original equipments supplied at the time of sale
were selected on the basis of their compatibility with the frame, fork and all other pants.
Certain after-market products may or may not compatible with your Jdbug Scooter. Unsuitable
modification can bring you a hazard! Consult your retailer or call Jdbug
replacing any component with a non-factory specified product.
WARNING:
CHECK LOCAL LAWS REGARDING SCOOTER USE. Check local laws and regulations to see where
and how you may use your Jdbug scooter legally.
In local laws and regulations regarding laws governing helmet use and scooter operation in your area.
1. Scooter Parts and Components
T-tube
Safety button
Fork
Wheel
Steering column adjusting screw
2. Unfolding the Jdbug Scooter for First-Time Use
A. Insert and secure the left and right handlebars by pressing the spring-loaded buttons and inserting
them into the T-tube. Make certain the spring-loaded button engages the hole in the T-bar for each
handlebar
.
WARNING:
Failure to properly engage the spring-loaded buttons may cause the handlebars to dislodge while
riding and may cause you to lose control and fall. When correctly
rotate nor will they move sideways. Note that when properly engaged, the spring-loaded buttons are
clearly visible in the holes on the T-tube.
BUG PRODUCTS
Grip
WITH
YOUR
JD BUG SCOOTER.
Handlebar
Steering tube quick-release
Steering tube/ steering column
Deck
engaged
2
Your scooter
prior to modifying or
the handlebars
will not
has
Werbung
