Explanation Of Symbols - Mptech Flexispace Bedienungsanleitung

EN © 2024
The output filter is located near the control panel. Grab it by the sides,
turn it counterclockwise and remove it from the vacuum cleaner
base. Clean the filter by removing dirt. If necessary, the filter can be
washed and then wiped thoroughly with a dry cloth or paper towel
and left to dry. After cleaning, connect the filter to the vacuum cleaner
base - make sure to match the hooks to the holes in the vacuum
cleaner base housing, and then turn the filter clockwise.
New filters can be purchased from the manufacturer.
Contact: (071) 71 77 400 or pomoc@mptech.eu
CLEANING THE ELECTRIC BRUSH
Disconnect the electric brush from the pipe or the vacuum cleaner
base, depending on how it was installed. Access to the cleaning brush
is located at the bottom of the electric brush. Press the lock button on
the side of the brush until you hear a click, then lift the lock and
remove the cleaning brush. Clean the brush from dirt and place it in
the electric brush. Close the brush lock. Correct closing of the brush
lock will be signaled by a clicking sound

6. Explanation of symbols

The device packaging can
be recycled in accordance
with local regulations.
Symbol
cardboard
material).
25
All rights reserved
for corrugated
(packaging