mPTech Flexispace Bedienungsanleitung Seite 24

EN © 2024
EMPTYING THE DUST CONTAINER
Make sure your device is not charging or turned on. Disconnect the
dust container from the vacuum cleaner base. Press the container
flap lock button and empty its contents. Then close the flap of the dust
container and connect it to the vacuum cleaner base.
CLEANING AND REPLACING FILTERS
The filter is an element whose task is to retain impurities.
After some
significantly. We therefore recommend checking and cleaning
the filter at regular intervals.
Make sure your device is not charging or turned on. Disconnect the
dust container from the vacuum cleaner base. Remove the input filter
from the dust container by pulling the handle on it, then insert the
mesh filter into the hole in it and pull it up. Empty the contents of the
container and then clean the input filter and mesh filter, removing any
dirt.
If necessary, the filters can be washed, then wiped thoroughly with a
dry cloth or paper towel and left to dry. After cleaning, install the filters
in the dust container. Connect the dust container to the vacuum
cleaner base.
time, its filtering
24
All rights reserved
properties deteriorate