Werbung
Verfügbare Sprachen
Verfügbare Sprachen
dding detergent
Adding detergent and fabric softener
1. The Dispenser Drawer
Detergentfor
Fabric
main wash
softener
(u-L/)
0.9.1)
• Main wash only U
• Pre Wash + Main Wash U CLI
2. Adding Fabric Softener
• Do not exceed
the maximum
Overfilling can cause early dispensing
of the fabric softener
clothes.
• Do not leave the fabric softener
detergent drawer for more than 2 days.
(Fabric softener could harden)
• Softener will automatically be added
during the last rinse cycle.
• Do not open the drawer when water is
supplied
• Solvents(benzene, etc) are not
allowable.
Do not pour fabric softener
directly on the doths
Detergentfor
pre wash
(\-L])
II/
fill line.
which
could stain
in the
3. Detergent dosage
• The detergentshould be usedaccording to the
instruction of the detergentmanufacture.
• If too muchdetergentis usedmore than the
recommendedamount,too many sudscan
occur and this will decreasethe washing result
or causeheavyload to the motor. (Causing a
malfunction)
• Usepowder detergentonlyfor thefront
loading washer.
• Detergent usage may need to be adjusted
for water temperature, water hardness,
size and soil level of the load. For best
results, avoid oversudsing.
4. Water
softener
• A water softener, such as Calgon can be
used to cut down on the use of detergent
in extremely hard water areas. Dispense
according to the amount specified on the
packaging. First add detergent and then
the water
softener.
• Use a quantity of detergent as for soft
water.
* Tips
Full load : according to
manufacturer's
recommendation.
Part load
: 3/4 of the normal
Minimum
load
: 1/2 of full
• Detergent is flushed from the dispenser at
the beginning of the cycle.
amount.
load.
Werbung
