Werbung
Verfügbare Sprachen
Verfügbare Sprachen
nstallation
Installation place requirement
Drain
asher
approx.
2cm
• Positioning
Install
the
washer
on a flat
Make sure that air circulation around the washer is not impeded by carpets,rug etc.
• Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar
materials
under
the washer.
• If it is impossible to avoid positioning the washer next to a gas cooker or coal burning
stove,an insulating(85x60cm)
stove,must
be inserted
• The washer
must not be installed
• Please ensure that when the washer is installed, it is easily accessible for the engineer in the
event
of a breakdown.
• With the washer installed adjust all four feet using the transit bolt spanner provided ensuring
the appliance is stable, and a clearance of approximately 20mm is left between the top of
the washer
and the underside
Level
Hose
Allowableslopeunderentirewasheris 10
Power
Must be within
washer.
Laundry
appliance.
Tub
Additional
For wall, door and floor modeling is required.
(IOcm : rear /2cm:right & left side)
Do not place or store laundry products on top of washer at
any times.
They can damage the finish or controls.
hard
floor.
covered with aluminum foil on the side facing the cooker or
between
the two appliance.
in rooms where the temperature
of the work-top.
floor
:
outlet
:
I .5 meters
of either
Do not overload
the outlet
Clearance
:
side of location
of
with
more
than one
can drop below OOC.
Werbung
