Failure Display And Inspection - Amzchef Fs-R55S-Prs01B Bedienungsanleitung

The ceramic hob or
a cooking zone has
tu rned itself off
unexpectedly, a tone
sound s and an error
code is displayed
(typi cally alternatin g
with one or two
digit s in the cooking
tim er display).

Failure Display and Inspection

If an abnormality comes up, the hob will enter the protective state automatically and display
corresponding protective codes:
Code Possible causes
H Beware of hot surfaces
F Internal communication
E4 Furnace surface thermocouple failure
E8 Relay shorted
E9 NTC1 Sensor open circuit
E5 NTC1 Sensor short circuit
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the ceramic
hob.
English
Technical fault.
Measures
It will disappear when the surface has cooled down
to a safe temperature.
Contact the aftersales service.
The hob emits a "B" sound.
Contact the aftersales service.
Please note down the error
lett ers and numbers, swit ch
th e power to the ceramic hob
off at the wall, and contact a
qualifi ed technician.
83