amzchef FS-R55S-PRS01B Bedienungsanleitung Seite 82

cooking zone stops heating .
b.During working status, touch ON/OFF button ,all cooking zones stop heating, the display show
"H" , the appliance enters stand-by mode.
Beware of hot surfaces
When the surface temperature exceeds 60°C, an "H" will be displayed indicating that the cooking
zone is too hot to touch.It will disappear when the surface has cooled down to a safe temperature.
It can also be used as an energy saving function if you want to heat further pans, use the ceramic
hob that is still hot.
1. Touch the timer button until the power level indicator for the related cooking zone flashes.
The zone is selected.
3.Set the time by touching the "-" or "+" control.
Hint: Touch the "-" or "+" control once will decrease or increase by 1 minute.
Touch and hold the "-" or "+" control, the timer will decrease or increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically return to 0 minute.
4.When the time is set, it will begin to count down immediately. The display
English
78