MIRKA RP-300NV Betriebsanleitung Seite 4

77 mm (3") 3,000 RPM Rotary Polisher (See "Product Configuration/Specifications" Table for particular Model)
to which this declaration relates is in conformity with the following standard(s) or other normative document(s) EN ISO 15744:2008. Following the
provisions of 89/392/EEC as amended by 91/368/EEC & 93/44/EEC 93/68/EEC Directives and consolidating Directive 2006/42/EC
11.10.2012 Jeppo
Place and date of issue
Operator Instructions
Includes – Warranty, Please Read and Comply, Proper Use of
Tool, Work Stations, Putting the Tool Into Service, Operating
Instructions, Product Configuration/Specifications Tables,
Parts Page, Parts List, Spare Parts Kits, Trouble Shooting
Guide, Service Instructions
Manufacturer/Supplier
KWH Mirka Ltd.
66850 Jeppo
Finland
Tel: + 358 20 760 2111
Fax: +358 20 760 2290
Recommended Airline
Size - Minimum
10 mm 3/8 in
Declaration of conformity
KWH Mirka Ltd.
66850 Jeppo, Finland
declare on our sole responsibility that the products
Ralf Karlström
Name
Important
Read these instructions care-
fully before installing, operating,
servicing or repairing this tool.
Keep these instructions in a safe
accessible location.
Required Personal Safety Equipment
Recommended Maximum
Hose Length
8 meters 25 feet
3
MIRKA 3,000 RPM
77 mm (3 in.)
ROTARY POLISHER
Signature or equivalent marking of authorized person
Safety Glasses Breathing Masks
Safety Gloves Ear Protection
Air Pressure
Maximum Working Pressure
Recommended Minimum
6.2 bar 90 psig
NA NA