Removing The Batteries; For The Sake Of The Environment Do Not Throw Away Packaging Material - Progress Liliput Gebrauchsanweisung

Removing the batteries:

After removing the filter, take the retaining rubber band off and remove the two
contact caps from the contact tags on the battery.
Please handle the battery carefully – there may be a small residual charge in it
which could cause damage if its contacts are bridged together. It is therefore
advisable to transport the battery in a plastic bag.
There are two possible ways of disposing it:
• Take it to the toxic waste disposal facility provided by your local authority.
• Hand it in at one of the AEG-Electrolux Service Centers.

For the sake of the environment do not throw away packaging material.

• The cardboard box can be taken to paper recycling facilities.
• Plastic bag made of polyethylene (PE) can be taken to recycling facilities of PE
collection depots.
• The filter parts are made of Polystyrene (PS). They do not contain any CFCs.
They can be taken to recycling facilities of PS collection depots.
Your local Department for the Environment will be able to give you advice as to
where collecting depots and recycling facilities are available.
The symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of this
product. For more detailed information about recycling of this product, please
contact your local city office, your household waste disposal service or the shop
where you purchased the product.
3