Electrical Shock Hazard - Ronix Rp-U100C Bedienungsanleitung

(e.g. contact with detergent: rinse with an abundance of clean water.
ATTENTION:
Through poor conditions of the electrical MAINS, shortly voltage drops
can appear when starting the EQUIPMENT. this can influence other
equipment (e.g. Blinking of a lamp). If the MAINS-IMPEDANCE Zmax
<0.335 OMH, such disturbances are not expected. (in case of need, you
may contact your local supply authority for further information.)
WARNING!

ELECTRICAL SHOCK HAZARD

Improper connection of the equipment – grounding conductor can result
in a risk of electrical shock. Check with a qualified electrician or service
person if you are unsure if an outlet is properly grounded. DO NOT modify
the plug provided with the appliance to fit an outlet, have a proper outlet
installed by a qualified electrician.
MAINS POWER CONNECTION
The following should be observed when connecting the high pressure
washer to the electric installation:
- The electric installation shall be made by a certified electrician and
comply with IEC-60364.
It is recommended that the electric supply to this appliance should
include either a residual current device that will interrupt the supply if the
leakage current to earth exceeds 30 mA for 30 ms.
17
User Manual