Interphone RIDESYNC Bedienungsanleitung Seite 8

Power
Ridesync can be powered in two ways:
1) By connecting the power cable with a 12V adapter directly to the motorcycle. Connect the Yellow "B+" cable to the
positive battery terminal, the Red "ACC" cable to the key switched power, and the Black "GND" cable to the negative
battery terminal. It is recommended to perform the wiring installation only by experienced personnel for safety
reasons.
2) By connecting the provided USB cable to a USB-A port (in a motorcycle or a car). The provided cable maintains
waterproof characteristics. Note: the device cannot be powered using a USB-C/USB-C cable but only with a USB-
C/USB-A type cable.
KO
OK
First Use
Ridesync needs to be paired with your smartphone only during the initial setup. To proceed with pairing, after
connecting Ridesync to power and enabling Bluetooth and Wi-Fi functions on your smartphone, press the "Carplay"
icon for Apple smartphones or "Android Auto" for Android smartphones as illustrated on the screen.
On the next screen, follow the prescribed instructions.