EN
General
Guidelines
Please read the following instructions carefully
and use the product accordingly.
Please keep this manual and hand it over if
you transfer ownership of the product.
This summary may not include every detail of
all variations and considered steps. Please
contact us if further information and help are
needed.
Warnings
Do not allow children to put their heads into
the gaps between the metal pipes.
Children are not allowed to play under the
bed.
The product is heavy; children should not be
allowed to participate in handling; if there is
injury, the seller does not assume
responsibility.
Children are not allowed to climb or drag
this product during assembly, as this can
result in the product turning over and/or
falling on top of children, resulting in
personal injury.
Keep children away from the work area
during assembly. Most screws and other
small parts in the product accessories may
be fatal if swallowed or inhaled.
To avoid potential danger of suffocation,
keep all parts and packaging (films, plastic
bags and foam, etc.) away from babies and
children.
Please keep the spare parts properly.
Notes
The product is intended for indoor use only. The product must be assembled and used in
accordance with the provisions of the manual. Personal injury and/or damage to product
may occur if products are used outside of their intended purposes and/or if products have
been changed/modified from their original design. The seller does not assume any
responsibility or liability with respect to any injury/damage caused by incorrect assembly or
improper use.
Avoid long-term exposure to humid environments to prevent mildew.
Keep the product away from fire sources and high temperatures. Do not expose the
product to direct sunlight.
Do not place any hot objects on the surface of the product.
If there are any defective or missing parts after unpacking, please cease assembly
immediately and contact us.
Please assemble the item on a spacious surface and do not place the unwrapped product
directly on the ground to avoid product damage.
Please do not stand or sit on the wooden boards.
Please wear gloves during the assembly and/or disassembly process to avoid scratches
from any sharp edges.
Please match the corresponding part and fitting based on the part number in the
manual.
If the part does not match with the fitting, please check the piece as specified in this
manual.
During assembly, first loosely align all screws with the corresponding pre-drilled holes and
then tighten the screws one by one.
Periodically inspect screw tightness while the product is in use. If necessary, retighten to
ensure structural integrity.
If you accidentally spill water or another liquid on the surface, immediately wipe clean
with a dry towel.
Please keep the product away from sharp, pointed objects and corrosive substances to
prevent product damage.
Please place this item on level, solid ground during use.
25