Stereo Headset With Microphone; Power On/Off - Port Connect On'r 500 Benutzerhandbuch

INSTRUCTIONS
CHARGING THE HEADSET
1. Connect the USB-C plug of the headset with the USB-C cable.
2.a. Connect the same cable to a computer:
- Make sure it has an USB port supporting charge.
2.b. Connect the same cable to an A/C power adapter and connect the adapter to a working A/C power socket.
3. The LED indicator of the headset will turn to steady
headset is fully charged.

POWER ON/OFF

1. Place the headset over your ears to hear the voice prompts.
2. Press and hold the power button for 3 seconds to turn the headset ON, and for 3 seconds to turn it OFF.
3. When powering ON, the LED indicator will flash
voice prompt. On first use, the headset will enter pairing mode with the LED flashing
been previously connected, it will automatically reconnect to the last paired device.
4. When powering OFF, the LED indicator will turn red, and the voice prompt "power off" will be heard.
The headset can be worn on either side. Ensure it is properly positioned on your head and ears, then adjust the
microphone close to your mouth.
NOTE: When the battery is low, the LED indicator will flash
sound every 10 minutes. For the best experience, ensure the headset is fully charged before use.
ON'R 500
BLUETOOTH ®

STEREO HEADSET WITH MICROPHONE

red when charging, and it will turn steady
blue for a few seconds, and you will hear the "power on"
red
red twice, and a "Battery Low" voice prompt will
4
blue when the
and blue. If it has
EN - ENGLISH
USB-C charging
cable included
OR
Powered via
computer's
USB port
Powered via A/C
power adapter