Charging The Headset - Port Connect On'r 700 Benutzerhandbuch

INSTRUCTIONS

CHARGING THE HEADSET

OPTION 1 - Charge the headset via its USB-C port
1. Connect the USB-C plug of the headset with the USB-C cable.
2.a. Connect the same cable to a computer:
Make sure it has an USB port supporting charge.
If the previous is not verified, plug the cable to the USB-A to USB-C converter and connect it to a USB-C port
of your computer.
2.b. Connect the other end of the cable to an A/C power adapter, then plug the adapter into a functioning A/C power socket.
3. The LED indicator on the headset will display a steady
is fully charged.
OPTION 2 - Charge the headset via the charging base
1. Connect the USB-C port of the charging base to a USB cable.
2. Plug the other end of the cable into an A/C power adapter and connect the adapter to a working A/C power socket.
3. The LED indicator on the charging base will turn steady
4. Position the headset on the designated area at the top of the charging base. For proper placement, align the top of
the charging base between the ear cushion and the microphone side of the headset. The charging pins are located at
the bottom of the earcup with the microphone. Ensure the microphone side of the headset faces the same direction
as the LED indicator on the charging base.
5. The LED indicator on the headset will turn
Once fully charged, the charging base indicator will return to a steady blue.
Power ON/OFF:
Place the headset on your ears to hear the voice prompts. Press and hold the power button for 3 seconds to turn the
headset ON and for 4 seconds to turn it OFF.
The LED indicator on the headset will light up
powered OFF.
The headset can be worn on either side; ensure it fits comfortably over your ears and adjust the microphone to be
positioned close to your mouth.
Note: When the battery is low, the LED indicator on the headset will flash
Low" voice prompt will sound every 15 minutes. To ensure the best experience, always make sure the headset is fully
charged before use.
BLUETOOTH ® STEREO HEADSET WITH CHARGING BASE
red light while charging and will turn off when the headset
blue when powered.
red while charging, and the LED on the charging base will flash red.
blue for 1 second when powered ON and
red twice every 2 minutes, and a "Battery
4
ON'R 700
Option 1
Option 2
red for 1 second when
Left
EN - ENGLISH
USB-C charging
cable included
OR
USB-C charging
cable included
Right
Powered via
computer's
USB port
Powered
via A/C power
adapter
Powered via A/C
power adapter