PORT CONNECT ON'R 500 Benutzerhandbuch Seite 5

INSTRUCTIONS
PAIRING THE HEADSET:
OPTION 1 - Direct Bluetooth ® pairing
1. When the headset is turned OFF, press and hold the power button for 3 seconds to automatically enter
Bluetooth ® pairing mode.
2. The LED indicator on the headset will flash alternately
3. Refer to the "Bluetooth ® Pairing Instructions" manual to connect the headset with your device.
4. Once successfully connected, the LED indicator on the headset will display a steady
OPTION 2 - Dongle Bluetooth ® pairing
1. Insert the USB Bluetooth ® dongle into your computer's USB port (use the USB-A to USB-C adapter if
necessary), ensuring the headset is already in pairing mode (flashing
2. Press and hold the pairing button on the dongle for 5 seconds.
3. The LED indicator on the USB Bluetooth
connected, both the dongle's and the headset's LED indicators will flash blue slowly.
4. Ensure that «ON'R» is selected as both the audio input and output device in your conferencing software and
on your computer. The headset will also support MS Teams control functions.
OPTION 3 – Wired connection
1. Connect the USB-C port of the headset to a USB-C to USB-A cable.
2. Connect the other end of the cable to a computer, ensuring it has a USB-A port that supports audio. (If the
USB-A port does not support audio, use a USB-A to USB-C converter and connect it to a USB-C port on your
computer).
3. The LED indicator on the headset will display a steady
be used in this configuration and will support MS Teams control functions.
BLUETOOTH ® STEREO HEADSET WITH MICROPHONE
blue and red while in pairing mode.
blue and red).
® dongle will flash blue and red while pairing. Once successfully
red light while charging. However, the headset can still
5
ON'R 500
blue light.
PAIRING
CONNECTED
EN - ENGLISH
PAIRING
CONNECTED
®
Bluetooth pairing
BT
3S
PAIRING
CONNECTED
®
Bluetooth pairing
BT
5S 3S