Hisense Party Rocker One Bedienungsanleitung Seite 11

Press button repeatedly to select the TUNER source. The display will show " TUNER " .
TUNING in a Station
Auto Tuning
1 Press and hold button to start auto tuning. Press
2 The searched radio stations will be stored as preset stations.
Note: The search may not stop at a station with a very weak signal.
Manual Tuning
Press and hold
the frequency being searched. Once a station has been found, the scanning will stop automatically to
change the frequency until you nd the station you want.
Searching for a radio station manually
1 Brie y press the buttons
2 Each time the buttons
Recalling a preset station
1 Press button to switch between preset station and frequency.
2 Press / button to select your desired preset station.
Built-in Battery Charging
Use the AC power cord(included) to connect AC power input socket on the unit to AC power outlet, the
current charging-indicator light on the unit will ash during charging, when ve charging- indicator light
on the unit keep solid light that the battery has been fully charged.
Alternatively, connect one terminal of the vehicle DC power adapter (not included) to the DC input
socket on the unit and connect the other terminal of the vehicle DC power adapter to the power socket
on the vehicle.
5 LED white light up = approx. 100 % full
4 LED white light up = approx. 80 % full
3 LED white light up = approx. 60 % full
2 LED white light up = approx. 40 % full
1 LED white light up = approx. 20 % full
(indicating charging is needed)
Note: when the battery is low, the unit will emit a prompt beep.
When DC in is connected for charging, the unit can only be charged and cannot be played.
FM Radio Operation
or button to start the forward or reverse scanning. The display will show
or until the optimal reception frequency is reached.
or are pressed, the frequency decreases/increases by 0.05 MHz.
Battery Charging For Party Speaker
button again to stop the auto tuning.
EN
FR
ES
PT
DE
IT
PL
RO
CZ
NL
SK
SL
HR
HU
TR
RU
SR
BS
SQ
MK
GR
BG
11