Werbung
Switch
Power button
Betriebsablauf der Cap-Heißpressmaschine
4.Temperature unit conversion
In standby mode, press and hold the power button for 4
seconds, and press the up and down arrows to select the
"K" cap printing mode.Press the power button again and
press the up and down arrows to select the temperature
unit.
1.Plug in the power cord, turn on the power
switch, and enter standby mode.Press and
hold the power button for 4 seconds to
select "K" cap printing mode.
4.
Temperature setting
After powering on, short press the power button to
enter the temperature setting mode, and press plus
or minus to set parameters. Wait 5 seconds or
press the power button twice
to exit temperature mode.
5. Time setting
After powering on, short press the power button
twice to enter the time setting mode, and press plus
or minus to set parameters. Wait 5 seconds or
press the power button twice to exit time mode.
- 7 -
Werbung
