Werbung
3. Accessories list
Mini cap printing machine
4. Key Function Introduction
Switch
Power button
Controller
1.Power on
After powering on, turn on the switch and enter
standby mode. Short press the power button to
turn on the machine.
2.Power off
Long press the power button for 2 seconds to turn
off the machine.
3.Automatic power off
If there is no operation within 30 minutes,the
machine will automatically power off.
4.Temperature unit conversion
In standby mode, press and hold the power button for 4
seconds, and press the up and down arrows to select the
"K" cap printing mode.Press the power button again and
press the up and down arrows to select the temperature
unit.
- 6 -
Power cable
Manual
Werbung
