Filling And Emptying The Tank - Diadora Rq 400 Bedienungsanleitung

B

FILLING AND EMPTYING THE TANK

Remove the filler plug (no. 33) from the upper tank cap (no. 12).
To fill the tank with water, see fig. A. Insert the funnel (no. 77) into the tank and then use a cup or the pump siphon (no. 76)
and a bucket to fill the tank. Use the water level indicator on the side of the tank to measure the desired water level in the
tank.
To empty the tank, see Fig. B. Place a bucket next to the rowing machine and pump the water from the tank into the bucket
using the pump suction cup (no. 76).
Insert the filler plug (no. 33) into the upper tank cap (no. 12). Wipe off any excess water from the frame.
NOTE:
Only fill the tank with good quality water, e.g. purified water. If you only have tap water available, please remember to add 1
piece of water purification tablets to the tank (1 packet is included). Never use pool chlorine or chlorine bleach as it will damage
the tank and void the warranty
Add 1 water purification tablet every 6 months or as required. If the water remains cloudy, replace it in good time.
Do not use the tank water for other purposes. Please dispose of the water immediately after pumping it out of the tank.
WATER LEVEL
See Fig. A. The water level indicator on the side of the tank. The maximum fill level is 6. Never fill the tank above this level.
Filling the tank above this limit will invalidate the warranty.
The resistance depends on the water level in the tank. Water level 1 is the lowest resistance. Level 6 is the highest resistance.
33
77
76
SETTINGS
PEDAL ADJUSTMENT
The pedal strap is adjustable and can be adapted to the user's foot size and
leg height
Fig.A
12
MAXFILL
WATER LEVEL
RESISTANCE
Water level label
RESIS
MIN . FILL
OPERATING INSTRUCTIONS
33
76
27
Fig.B
12