Switching On/Off; Selecting The Operating Mode - Renkforce AC-WR 5002 Bedienungsanleitung

c) Switching On/Off
Switching on: Keep the operating button (7) pushed for 3 seconds to switch on the screen
and the camera.
Switching off: Keep the operating button (7) pushed for 3 seconds in standby mode switch
off the camera.
The screen is automatically deactivated in standby mode to save energy. The activity display
is lit red for verification. The time can be set in the menu.
Deactivation at insufficient energy supply: If the battery status is very low, the icon
appear in the LCD (4) and indicate that the battery must be charged. If the icon is lit red and
flashes, the camera is switched off automatically.
d) Selecting the Operating Mode
The camera has three modes: Video recording mode, photo mode and playback mode. Push
the operating button (7) after activation of the camera to select a mode.
will
37