Fig.4
6. Maintenance
6.1
Maintenance and cleaning
Do not use aggressive solvents or cleaning agents.
6.2
Filter cleaning
•
Do not perform maintenance and cleaning during the charging process.
•
Place the cleaner on a level surface.
•
Open the unit at the two fixing points to be able to remove the cover and filter insert (Fig. 5).
•
Remove all dirt and water from inside the device (Fig. 6).
•
The cleaning intervals depend on the degree of soiling of the water.
•
Assemble the device in the reverse order to ready it for use again (Fig. 6).
Ensure that the filter and motor head are in the correct position when assembling.
Fig. 5
Fig. 6
Translation of original operating instructions
5