Removing Blockages; Maintenance And Storage; Transporting Lithium Batteries - Primaster Pals 40 Gebrauchsanweisung

GB ENGLISH
The protective equipment on the appliance is strictly
prohibited to be disassembled, changed, used in
conflict with the designation and it is prohibited
to attach any protective equipment of other
manufacturers.
Always switch the machine off before attaching or
removing the collection bag.
Switch the machine off if it becomes blocked, before
removing the blockage. Do not transport the machine
if the energy source is running.
Remove the rechargeable battery before carrying out
any setting, cleaning or maintenance work on the device.
WARNING
If the appliance starts abnormally vibrating, switch
the engine off and search for the cause immediately.
Generally, vibrations are a warning against operating
failure.
Stop the device and disconnect it from the power supply
• whenever you leave the lawnmower
BATTERIES
WARNING
Risk of fire! Risk of explosion!
Never use damaged, defective or deformed accumulators. Ne-
ver open or damage the accumulator or let it fall on the ground.
Never charge the battery in an environment with acids
and easily flammable materials.
Protect the battery against heat and fire.
Battery to be used at the ambient temperatures between
10°C and +40°C only.
Never put the battery on heaters and do not expose it to
strong sunlight for a long time.
After being subject to heavy load, let the battery cool
down first.
Short circuit - do not bridge the accumulator contacts with
metal parts.
The accumulator must be packaged (plastic bag,
box) or accumulator contacts must be sealed up for
accumulator disposal, transport or storage.
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
30
• before removing blockages
• before checking, cleaning or working on the device
• after contact with a foreign object, to check the device
for damage

Removing blockages

In the event of a blockage, switch the device off immedi-
ately and wait until the machine has stopped completely.
Then remove the object.

Maintenance and storage

Switch the machine off and do not touch any moving,
dangerous parts. Wait until the movement has
stopped completely and the device has cooled down.
when you inspect the machine for damage;
if you are replacing or repairing damaged parts;
if you check for loose parts and tighten them;
Do not allow processed material to accumulate in the
ejection zone as this may prevent proper ejection and
cause the material to be reintroduced back through
the feed opening.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Vapours may leak out in case of unauthorised use or
when using a damaged accumulator. Bring fresh air
and seek medical advice if experiencing difficulties.
Vapours may irritate the respiratory system.

Transporting Lithium Batteries

Lithium-ion batteries are subject to the Dangerous
Goods Legislation requirements. Transportation of
those batteries has to be done in accordance with
local, national and international provisions and
regulations.
The user can transport the batteries by road without
further requirements.
Commercial transport of Lithium-Ion batteries by third
parties is subject to Dangerous Goods regulations.
Transport preparation and transport are exclusively to
be carried out by appropriately trained persons and
the process has to be accompanied by corresponding
experts.
When transporting batteries:: Ensure that battery
contact terminals are protected and insulated to
prevent short circuit. Ensure that battery pack is
secured against movement within packaging. Do not
transport batteries that are cracked or leak. Check with
forwarding company for further advice