tribit StormBox Blast Bedienungsanleitung Seite 28

EN
7. Stereo Mode
Speaker A
>5S
① ②
① Please make sure that the two speakers are turned on.
Long press the Bluetooth button of the speaker A for 5s to enter the Stereo
②
Mode pairing ( Note: this speaker will be regarded as the main speaker );
Short press the Bluetooth button of the speaker B to enter the pairing mode (
③
Note: If this speaker is already in pairing mode, there is no need to perform this
operation );
④
When you hear the prompt sound "stereo mode", the pairing is successful and
the speaker A & speaker B enter the Stereo Mode. At this time, the main speaker
will broadcast "left channel" and the secondary speaker will broadcast "right
channel".
Warm Tip: For Stereo Mode, you need to have two Tribit StormBox Blast
speakers. And make sure the firmware of both speakers have been upgraded
to the latest version through the APP.
9
StormBox Blast
Speaker B
① ③
8. Reset
Volume -
If the speaker has abnormal conditions, you can try to reset the
●
Blast ( Note: long press the ''volume +''and ''volume -'' buttons at the same
time for 5 seconds ). After resetting, the historical pairing information will be
cleared, and you need to re-pair the Blast with the device before use.
EN
Volume +
>5S
10