PERFECTPRO ROCKPRO Bedienungsanleitung Seite 8

Showing Bluetooth information on the
display
If your connected device can provide information from
the track being played, when listening to Bluetooth audio,
repeatedly press the Info / Menu button to cycle through
the following information on the radio's display:
Title, Artist, Album, Date.
Please note that the availability of information depends on
the specific media format.
Reconnecting a previously-paired Bluetooth
source device
In the radio, you can select the Bluetooth device from the
device list to connect again. The device names would
be shown if the name of the Bluetooth devices were
configured in the Bluetooth devices.
GB
1.
In Bluetooth mode, press the BT button to display the
"BT Paired List" on the screen. If not in Bluetooth mode,
pressing the BT button twice will also display the "BT
NL
Paired List".
2. Rotate the Tuning knob to select the name of your
desired Bluetooth device.
DE
3. Press the Tuning knob to start Bluetooth reconnection.
The radio can memorize up to 6 sets of paired Bluetooth
FR
devices, when the memory exceeds this amount, the
earliest paring device will be overwritten from the device.
If your Bluetooth device already paired with the radio
previously, the unit will memorize your Bluetooth device
and it attempts to reconnect with a Bluetooth device in
memory which is last connected.
Note:
If you have ever deleted the "Rockpro" from your
connected Bluetooth device, auto-reconnection will be
unsuccessful.
Disconnecting your Bluetooth device
Press and hold the Bluetooth pairing button for 2-3
seconds to disconnect with your Bluetooth device. You
can also press the Source button to select any mode
other than Bluetooth mode or turn off Bluetooth on your
Bluetooth source device to disable the connection.
Note:
After 15 minutes of no signal output in Bluetooth mode,
the idle power consumption in this mode is less than 2W,
or the power consumption in off mode is less than 0.3W.
The Auto-Power management function will be activated
in Bluetooth mode. If there is no signal from Bluetooth for
a period of over 15 minutes, the radio will automatically
switch to standby (or off) mode. Pressing the Power
button will turn on the unit.
The PerfectPro Stereo Pairing Feature
Stereo Pairing (also known as True Wireless Stereo or
TWS) is a feature that allows two speakers to wirelessly
connect with each other and an audio device to play
music in stereo without the need for any cables. Your
7
Rockpro can be wirelessly connected to a second
Rockpro and an audio device to play music through both
speakers at the same time.
Setting up the first speaker
1.
Make sure the first speaker is in Bluetooth mode and
connect to a Bluetooth device.
2. Press the Stereo pairing button to enter the Stereo
pairing mode.
Setting up the second speaker
1. Make sure the second speaker is in Bluetooth mode
and that it has not connected to a Bluetooth device.
2. Press the Stereo pairing button to enter the Stereo
pairing mode.
After the speakers have successfully connected, the
first speaker will display "Lead Stereo". The second
speaker will display "Follow Stereo".
Note:
● Set up the second speaker within 1 minute of the first
one, otherwise the setting of the first speaker will be
canceled.
● When both speakers are connected to the same
Bluetooth device, the Stereo Pairing feature cannot be
set. In this case, you need to disconnect the Bluetooth
connection of one of the speakers to set up the Stereo
Pairing feature.
Starting playback
1.
Start playback on the connected Bluetooth device and
adjust the volume on the Bluetooth device or one of the
speakers for comfortable listening.
Note:
The volume and EQ settings of one speaker are
reflected on the other.
2. Use the controls on your Bluetooth device to play /
pause and navigate tracks. Alternatively, control the
playback using the Play / Pause, Next and Previous
buttons on either speaker.
3. Press and hold the Next or Previous button on either
speaker to fast forward or rewind within the current track.
Release the button when the desired point is reached.
Note:
Not all player applications or devices may respond to all
of these controls.
Switching the audio mode
When using two speakers, you can switch between
"Stereo", "Left" and "Right" mode. Press the L / R button
on either of the speakers to change the audio mode.
"Stereo" mode: Both speakers play the same sound.
This is the default setting.
"Left" / "Right" mode: One speaker plays the sound on
the left channel, while the other speaker plays the sound
on the right channel for stereo playback between the
speakers.