Playing Audio Files In Bluetooth Mode - Perfectpro Rockpro Bedienungsanleitung

[Timeout] to adjust the length of time before the
backlight turns off or select [On Level] to adjust the
display's brightness level when the radio is turned
on or select [Standby Level] to adjust the backlight
brightness when the radio is in standby mode.
● [Language]: Select this option to configure the
language in which the radio's menus are shown.
● [Factory Reset]: Select this option to reset the radio
to the default factory settings. After confirmation, all
user settings and preset stations will be erased.
● [SW Version]: Select this option to view the software
version of the radio.
Manually setting the clock
1. Open the System settings menu using the three steps
previously described. Then select
"Set
after that, select
selection, the day digits will flash.
2. Rotate the Tuning knob until the correct day is shown
on the display. Press the Tuning knob to confirm the
setting. The month digits will then flash.
3.
Rotate the Tuning knob to select the correct month.
Press the Tuning knob. The year digits will then flash.
4. Rotate the Tuning knob to select the correct year. Press
the Tuning knob. The hour digits
5. Rotate the Tuning knob to select the correct hour. Press
the Tuning knob. The minute digits
6. Rotate the Tuning knob to select the correct minutes.
Press the Tuning knob to confirm the setting.
● If the radio has been set to use a 12hour format,
there will be an option here for setting AM or PM for
the clock time. Rotate the Tuning knob to select AM
or PM. Press the Tuning knob to confirm the setting.
Listening to music via Bluetooth streaming
You need to pair your Bluetooth device with your radio
before you can auto-link to play / stream Bluetooth music
through your radio. Pairing creates a 'bond' so the two
devices can recognize each other.
Pairing and playing your Bluetooth device
for the first time
1. With your radio switched on, press the Source button or
BT button to select Bluetooth mode. The "BT Pairing"
will show on the LCD display and the Bluetooth icon in
the bottom bar of the display will blink.
2. Activate Bluetooth on your device according to the
device's user manual to link to the radio. Locate the
Bluetooth device list and select the device named
"Rockpro" (With some Smartphone's that are equipped
with earlier versions than BT2.1 Bluetooth device, you
may need to input the pass code "0000").
3. Once connected, there will be a confirmation tone
sound and the name of your connected Bluetooth
device will show on the display.
the bottom bar of the display will stop blinking.
"Time setup", and
Time". Once you confirm the
will then flash.
will then flash.
The Bluetooth icon in
You can simply select and play any music from your
source device.
4. The volume control can be adjusted from your source
device, or directly from the radio. Use the controls on
your Bluetooth-enabled device or on the radio to play /
pause and navigate tracks.
Note:
● If 2 Bluetooth devices are pairing for the first time, both
will search for your radio, it will show its availability on
both devices. However, if one device links with this unit
first, then the other Bluetooth device will not find it on
the list.
● If you take your source device out of range, the
connection will be temporarily disconnected to your
radio. Your radio will automatically reconnect if the
source device is brought back in range. Be aware that
during the period of disconnection, no other Bluetooth
device can pair or link with your radio.
● If "Rockpro" shows in your Bluetooth device list but your
device cannot connect with it, please delete the item
from your list and pair the device with the radio again
following the steps described previously.
● The effective operation range between the system and
the paired device is approximately 10 meters (30 feet).
Any obstacle between the system and the device can
reduce the operational range.
● Bluetooth connectivity performance may vary depending
on the connected Bluetooth devices. Please refer to the
Bluetooth capabilities of your device before connecting
to your radio. All features may not be supported on
some paired Bluetooth devices.
● With some mobile phones, making / receiving calls,
text messages, e-mails or any other activities unrelated
to audio streaming may mute the Bluetooth audio
streaming or even temporarily disconnect from your
device. Such behavior is a function of the connected
device and does not indicate a fault with your radio.

Playing audio files in Bluetooth mode

When you have successfully connected your radio with
the chosen Bluetooth device you can start to play your
music using the controls on your connected Bluetooth
device.
1. Once playing has started, the volume can be adjusted
both on the radio using the Volume knob and on the
Bluetooth device using the volume control of the device.
2. Use the controls on your Bluetooth device to play /
pause and navigate tracks. Alternatively, control the
playback using Play / Pause, Next track, Previous track
buttons on your radio.
3. Press and hold the Fast forward or Rewind button to
move through the current track. Release the button
when the desired point is reached.
Note:
Not all player applications or devices may respond to all
of these controls.
GB
NL
DE
FR
6